09-30-2007 08:50 AM - edited 03-14-2019 11:48 PM
In CCME 4.1
When a call comes from fxo
operator answers
callerID appears
then operator transfers to any ip telephone, it shows operator telephone#
instead of outside callers.
09-30-2007 08:56 AM
Here is my Config
!
voice-port 0/0/0
supervisory disconnect dualtone mid-call
supervisory custom-cptone TT-YENiSEHiR
timeouts call-disconnect 3
timeouts wait-release 3
timing hookflash-out 500
connection plar opx 3000
shutdown
description 4685000
station-id name 4685000
caller-id enable
!
!
ephone-dn 1
number 3000
label 4685000
name Line1
corlist incoming user-longd-gsm-int
!
!
!
ephone 1
device-security-mode none
video
mac-address x.x.16CC
username "xxx" password xxx
type 7931
button 1:1 2:2 3:3 4:4
button 5:5 6:6 7:7 8:8
button 9:9 10m16 11m17 12m18
button 13m20 14m21 15m22 16m27
button 17m28 18m30 19m32 20m37
button 21m39 22m41 23m44 24m24
!
!
!
ephone 2
device-security-mode none
video
mac-address x.x.525B
username "xxx" password xxx
type 7906
button 1:23
!
!
!
09-30-2007 02:08 PM
This is happening with recent CME and I'm not sure if there is a bug filed, or a configuration workaround. The correct behavior is to show both the caller and the transferrer number so one could tell right that is receiving a call for transfer.
If it is as issue for (I guess it is) please open a case with the TAC. Eventually, we can go back to find the last release were this worked as supposedly has to.
09-30-2007 11:39 PM
It is exactly the same situation.
I am using latest IOS
12.4(15)T1
I can return back to previous IOS
Which one is rigth?
THANKS
10-01-2007 01:01 PM
I think this not reletad on IOS
Ephone-1 is the operator phone (making-transfer)
If I assign one externel line to it
as follows, ther is no problem, callerid is displayed on transferred phone display.
ephone 1
device-security-mode none
video
mac-address 001B.D4C7.16CC
ephone-template 2
username "xxx" password 111
type 7931
button 1:1
If I assign more than one button
callerid is not displayed, instead transferring telephone# is displayed (3000)
10-01-2007 01:41 PM
Good find, in fact I wasn't able to define a past IOS that worked, I may just have seen the correct working on a phone with only 1 button configured.
Still a bug in my opinion and I will open a case as soon as practicable.
10-01-2007 03:49 PM
I use IOS 12.4(11)XW2
Nothing changes
11-07-2007 11:43 PM
Have you had a chance to open a case on this? Is there a case number published?
Thanks much.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: