dhavaltandel Mon, 10/01/2007 - 00:23

hey i got the answer, 3560 is only the VMPS client not a server.

but is still possible to create VMPS scenario, like do we have any third party or cisco software to make it done...?

- Dhaval Tandel

ankbhasi Mon, 10/01/2007 - 00:32

Hi Dhaval,

As you already got the answer 3560 cannot be conmfigured as VMPS server. There is no 3rd party tool or cisco software which can work as VMPS server. You need some higher end switch only.

HTH

Ankur

dhavaltandel Mon, 10/01/2007 - 02:41

yes, even i didnt found any tool like that.

anyways thanks for taking interest.

- Dhaval Tandel

stephen.stack Mon, 10/01/2007 - 11:45

Hi Dhaval,

If your switchs support dot1x, you can use it and a radius server to configure dynamic VLAn assignment.

I have a very sucessful working version of it on one of my customers networks.

I am quite happy to tell you how to do it if you like.

Regards

Stephen

hassan_oudeh Thu, 10/04/2007 - 14:34

Stehen,

im very interested on this, i have similar scenario. please can you tell us ?

Regards,

Hasan

stephen.stack Sun, 10/07/2007 - 05:20

Hi,

You should check out the post here ...

http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=LAN%2C%20Switching%20and%20Routing&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddf269f/4#selected_message

Or search forums for "Control access to LAN via Radius"

I have given all ino here. Should you need more clarity, please let me know.

Regards

Stephen

Actions

This Discussion