cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
641
Views
9
Helpful
4
Replies

NAT on 4510R

paul.matthews
Level 5
Level 5

A colleague has asked me what SW supports NAT on the 4510R (SUP5), and the SW advisor is currently not listing ANY features at all! He has apparently tried to configure it, and it does not recognise the command.

I would have expected NAT support to be pretty widespread - can anyone confirm what feature sets should support NAT.

1 Accepted Solution

Accepted Solutions

ajagadee
Cisco Employee
Cisco Employee

Paul,

NAT is not supported on the 4500 Switches. Please refer the below URL that lists the Network Address Translation Catalyst Switch Support Matrix

http://www.cisco.com/warp/public/473/166.html#topic1

Also, if you want to do large number of NAT, then also look at Firewall Services Module in the Catalyst 6500.

I hope it helps.

Regards,

Arul

View solution in original post

4 Replies 4

Jon Marshall
Hall of Fame
Hall of Fame

Hi Paul

As far as i know the 6500 is the only switch that supports NAT. Yes i know it is a bit of pain. So if you want to do NAT you need to purchase either a 6500 or install a router in the path.

Neither solution is great !

Jon

Thanks Jon - bit of an omission in function there!

Paul.

ajagadee
Cisco Employee
Cisco Employee

Paul,

NAT is not supported on the 4500 Switches. Please refer the below URL that lists the Network Address Translation Catalyst Switch Support Matrix

http://www.cisco.com/warp/public/473/166.html#topic1

Also, if you want to do large number of NAT, then also look at Firewall Services Module in the Catalyst 6500.

I hope it helps.

Regards,

Arul

Thanks for the response - the link is just what I needed.

Paul.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco