When I downgraded from SCOS 3.1.0 to 3.0.6 from SCA BB 3.1.0, the SCA BB couldn't connect to the SCE. I checked it through the console and found that the system couldn't boot normally and ran into "recovery mode".
Here is the error from aux:
Exception current instruction address: 0x06bb9884
Machine Status Register: 0x0000b030
Data Access Register: 0xf0073ade
Condition Register: 0x22000040.
Data storage interrupt Register: 0x40000000
Task: 0x6e95cf0 "pvm_main"
I need your advice to resolve it.
Thanks & regards,