Wallmount positions for 7900 Series IP Phones

Unanswered Question
Oct 2nd, 2007

Good day!

Looking through cisco.com I have found 4 different p/ns:

CP-LCKNGWALLMOUNT2=

CP-LCKNGWALLMNT2=

CP-LCKNGWALLMOUNT=

CP-WALLMOUNTKIT=

and only 2 guides with pictures

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/ipp7960/wallmnt.htm

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/ipp7960/ippmount.htm

Can anyone help me to understand the differences and may be share some pictures?

Best regards, Eugene

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
rob.huffman Tue, 10/02/2007 - 04:49

Hi Eugene,

More confusing Part #'s :) The first two parts that you have listed are the exact same model so I don't know why there are two (but they are both the same).

These are called the "Universal" Wall Mount Kits because all phone models can be wall mounted using them;

CP-LCKNGWALLMOUNT2=

CP-LCKNGWALLMNT2=

The 2 denotes the "Universal"

http://www.cisco.com/en/US/products/hw/phones/ps379/prod_installation_guide09186a00801d0356.html

----------------------------------------------

These two (one locking and one non-locking) are the "older" Wall Mount Kits that only worked for the phone models like the 794x and 796x series;

CP-LCKNGWALLMOUNT=

CP-WALLMOUNTKIT=

http://www.cisco.com/en/US/products/hw/phones/ps379/prod_installation_guide09186a00800a8689.html

Hope this helps!

Rob

evarnavsky Tue, 10/02/2007 - 05:32

Rob, as usual thanks a lot.

Very interesting answer.

Two p/ns for the same equipment? Yupe...

Don't know what to say.

Even google did not help me.

rob.huffman Tue, 10/02/2007 - 05:43

Hi Eugene,

First off, you are most welcome. These part #'s are always confusing and having two identical parts with different ordering numbers just messes things up even more (I'm already confused enough :)

My understanding of this is, that now you really only need the "Universal" wall mount kit. Nice and simple (just like me!)

Take care,

Rob

d.haeni Thu, 02/21/2008 - 13:50

Hi Rob,

Can't argue with taste, but I think the 794x and 796x just look better when they're mounted flat (compared to the slanted "Universal" wall mount kit). Actually, that's what Cisco recommends, too:

e.g. http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps379/ps8535/product_data_sheet0900aecd8069bb68.html

In terms of ordering, you have your point, though :)

Cheers

/David

Actions

This Discussion