cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
235
Views
0
Helpful
1
Replies

Connection failing on PIX 515 6.3(4)

k.ramalingam
Level 1
Level 1

Need some help here

===================

Basically I have users coming in from the "clients" interface with Security level 0 and IP address 192.74.X.X/16 to a server on the dmz-client with security level 40 and ip address of 202.180.251.93/32 but the connection is failing even though there is an access-list allowing it from the "clients" interface, static (dmz-client, clients) and route configured. I have attached the PIX configuration and the failure logs as well.

Hope anyone can shed some light on this issue.

1 Reply 1

gfullage
Cisco Employee
Cisco Employee

Can't see anything obviously wrong in your config. Where did you say those error logs were? I'd like to see the syslog generated when this is refused.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: