a-vazquez Mon, 10/08/2007 - 08:44
User Badges:
  • Silver, 250 points or more

use the dialplan-pattern telephony-service command.


Create a translation-rule on the CME for the dial-peer pointing to the CUE. This translation rule is used to convert the E.164 number back to extension number format so it is acceptable to CUE.


This is a configuration example:


voice translation-rule 1

rule 1 /0115982\(....\)/ /\1/

!

!

voice translation-profile cue

translate called 1

dial-peer voice 100 voip

description Voicemail number

translation-profile outgoing cue

destination-pattern 01159829017

session protocol sipv2

session target ipv4:172.16.32.61

codec g711ulaw

no vad


For more information on configuring and troubleshooting CUE and CME, refer to these documents:


http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel2_3/guiadmin/ch4_trbl.html


Actions

This Discussion