private MIB: OID for Cisco RTR or IP SLA

Unanswered Question
Oct 2nd, 2007

Hello,

my router has the following configuration:

access-list 20 permit 10.10.10.10

snmp-server view Test mib-2.* included

snmp-server view Test ciscoMgmt.13 included

snmp-server community password view Test RO 20

rtr responder

rtr 11

type tcpConnect dest-ipaddr 10.20.20.20 dest-port 3111 source-ipaddr

10.30.30.30 source-port 12277 control disable

rtr schedule 11 life forever start-time now

Now, I want to give the server 10.10.10.10 the right, to read via SNMP the

RTR results.

Which SNMP value do I have to add, that the server can do that?

Is that the right configuration?

<<< snmp-server view Test rttMonStats.11 included >>>

Thanks a lot, Christian

If needed, the <sh rtr configuration>

SA Agent, Infrastructure Engine-II

Entry number: 11

Owner:

Tag:

Type of operation to perform: tcpConnect

Target address: 10.20.20.20

Source address: 10.30.30.30

Target port: 3111

Source port: 12277

Operation timeout (milliseconds): 60000

Type Of Service parameters: 0x0

Control Packets: disabled

Operation frequency (seconds): 60

Next Scheduled Start Time: Start Time already passed

Group Scheduled : FALSE

Life (seconds): Forever

Entry Ageout (seconds): never

Recurring (Starting Everyday): FALSE

Status of entry (SNMP RowStatus): Active

Threshold (milliseconds): 5000

Number of statistic hours kept: 2

Number of statistic distribution buckets kept: 1

Statistic distribution interval (milliseconds): 20

Number of history Lives kept: 0

Number of history Buckets kept: 15

History Filter Type: None

Enhanced History:

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion