MPLS Configuration Problem- Catalyst 3750

Unanswered Question
Oct 2nd, 2007
User Badges:

We have a difficulty enabling the MPLS on this particular switch. We couldn't find the command for the MPLS to enable in the interface. Is there any command or substitute command to do this? The following information was taken from the switch.

Device details:

Cisco IOS Software, C3750 Software (C3750-IPSERVICES-M), Version 12.2(25)SEE2, RELEASE SOFTWARE (fc1)

System image file is "flash:c3750-ipservices-mz.122-25.SEE2/c3750-ipservices-mz.122-25.SEE2.bin"

cisco WS-C3750-24P (PowerPC405) processor (revision K0) with 118784K/12280K bytes of memory.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion