Limiting access to specific devices using Cisco ACS

RVirdi · ‎10-03-2007

Hi,

I want to create users on our Cisco ACS server but restrict what devices they can Telent to. How would I go about configuring this on the ACS server. Thanks in advance for any pointers.

lgijssel · ‎10-03-2007

You can use the user-groups and device groups in the ACS for this.

Configuring the NAR for the group determines what users can access.

regards,

Leo

royalblues · ‎10-03-2007

This link might help

http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_tech_note09186a0080858d3c.shtml

http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_white_paper09186a00801a8fd0.shtml

HTH, rate if it does

Narayan

RVirdi · ‎10-03-2007

Hi Narayan,

The documents definately helped and have sorted it now. Thanks again.