10-03-2007 06:12 AM - edited 03-05-2019 06:50 PM
Hi,
I have a SUP2 module running older native IOS, the current installed DRAM for both SUP2 & MSFC2 is 128MB. If I want to upgrade to a IOS that required 256MB DRAM. Do I need to upgrade MSFC2 DRAM only, or need to upgrade both SUP2 & MSFC2 DRAM to 256MB? If upgrade to 512MB, are the part number MEM-S2-512MB,MEM-MSFC2-512MB correct?
Best Regards,
Jackson Ku
10-03-2007 06:42 AM
Jack,
You need to upgrade both hardware, here is the part number
MEM-MSFC2-512MB=
Here is the link,
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Config_Notes/78_6953.html
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Config_Notes/78_12693.html
Regards,
~JG
Please rate helpful posts
10-03-2007 07:29 AM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: