Health Check of a Switch

Unanswered Question
Oct 3rd, 2007
User Badges:

To check whether a switch is healthy and all is ok what should I be looking for in addition to the following?


show logs

show proc cpu

show proc mem

show env all


What else should I be looking for?


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ankbhasi Wed, 10/03/2007 - 09:10
User Badges:
  • Cisco Employee,

Hi Friend,


Which switch is this? If thee are the modular switches then you can also issue a command "sh mod" to check the modules status and "sh test" to give you port and line cards status.


HTH


Ankur

jon.axe Wed, 10/03/2007 - 09:34
User Badges:

One additional command I use is the show version command. This command tells me whether the switch was last rebooted by a loss of power or if it was rebooted by a software crash or a hardware failure.


These are good basic commands to use but it is always important to have the latest stable release of IOS installed on your switch.

Actions

This Discussion