cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
234
Views
0
Helpful
1
Replies

Custom rings in CallManager 5.1?

Jason Aarons
Level 6
Level 6

In CallManager 4.x I could edit the RingList.xml and put other .raw rings in the ringlist and tftppath folder, can I do this in 5.x and how?

1 Reply 1

Rob Huffman
Hall of Fame
Hall of Fame

Hi Jason,

The process is a little different (but similar) for 5.x Here is the related info;

Cisco Unified CallManager Features and Services Guide, Release 5.0(2)

Custom Phone Rings

Introducing Custom Phone Rings

Cisco Unified IP Phones ship with two default ring types that are implemented in hardware: Chirp1 and Chirp2. Cisco Unified CallManager also provides a default set of additional phone ring sounds that are implemented in software as pulse code modulation (PCM) files. The PCM files, along with an XML file (named Ringlist.xml) that describes the ring list options that are available at your site, exist in the TFTP directory on each Cisco Unified CallManager server.

You can get a copy of the Ringlist.xml file from the system using the following admin cli "file" commands:

admin:file

file list*

file view*

file search*

file get*

file dump*

file tail*

file delete*

Customizing and Modifying Configuration Files

You can modify configuration files (for example, edit the xml files) and add customized files (for example, custom ring tones, call back tones, phone backgrounds) to the TFTP directory. You can modify files and/or add customized files to the TFTP directory in Cisco Unified Communications Platform Administration, from the TFTP Server File Upload page.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a008062b707.html

Hope this helps!

Rob

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: