Forced Authorization Code on CCME

Unanswered Question
Oct 3rd, 2007


We are running CCME 4.0, is it possible for to configure Forced Authorization Code(FCA)on CCME ?

If yes, please let me know what are the configuration parameters needs to be added on CCME for FCA.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Paolo Bevilacqua Thu, 10/04/2007 - 03:05

There is no FAC on CCME like CM has.

If you are trying to limit calls, you have three solutions:

1. use PIN login with afterhours configuration

2. use COR

3. use a secrete prefix to make certain calls and configure your DP with that.

Hope this helps, please rate post if it does! Thu, 10/04/2007 - 05:09


Thanks for your reply.

Please let me know the configuration details or document for configuring 1 & 3 (PIN Login and sectret prefix).

One more clarification: Can we able to get Call Detail Reports on CCME?

Thanks in advance


Paolo Bevilacqua Thu, 10/04/2007 - 09:43


for configuring pin login and after-hours, please reference configuration guide on CCO:

for 'secret prefix', just config a new DP with destination-pattern ^2345....T

e.g. 2345 is your secret PIN.

CCME is now versions 4.2 and as I mentioned it does not support FAC like CM does.

Thanks for the rating and good luck!


This Discussion