10-03-2007 09:19 PM - edited 03-14-2019 11:53 PM
Hi,
We are running CCME 4.0, is it possible for to configure Forced Authorization Code(FCA)on CCME ?
If yes, please let me know what are the configuration parameters needs to be added on CCME for FCA.
Regards,
10-04-2007 03:05 AM
There is no FAC on CCME like CM has.
If you are trying to limit calls, you have three solutions:
1. use PIN login with afterhours configuration
2. use COR
3. use a secrete prefix to make certain calls and configure your DP with that.
Hope this helps, please rate post if it does!
10-04-2007 05:09 AM
Hi,
Thanks for your reply.
Please let me know the configuration details or document for configuring 1 & 3 (PIN Login and sectret prefix).
One more clarification: Can we able to get Call Detail Reports on CCME?
Thanks in advance
Regards,
10-04-2007 06:59 AM
Hi,
Is it true that CCME 4.1 will support FAC?
Regards,
10-04-2007 09:43 AM
Hi,
for configuring pin login and after-hours, please reference configuration guide on CCO:
for 'secret prefix', just config a new DP with destination-pattern ^2345....T
e.g. 2345 is your secret PIN.
CCME is now versions 4.2 and as I mentioned it does not support FAC like CM does.
Thanks for the rating and good luck!
05-26-2009 08:07 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide