Remote desktop through ethernet0/1

Unanswered Question
Oct 4th, 2007
User Badges:

Good day, I would apreciate it if somebody would like to help me set up our new router. The ISP is not very helpful. I got it connected to the net with some functionalty but I can not send mail througt the router it sais something like Relay not permited from your location. And i cant seem to get remote desktop working through the Ethernet 0/1 port. I will attach a network diagram with basic information. It any one needs more info I will suply it. PLZ Help.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
nikolay-shopik Thu, 10/04/2007 - 07:06
User Badges:

attach your sh run output. If you can't connect with remote desktop outside probably you haven't configured port mapping correctly.

nikolay-shopik Fri, 10/05/2007 - 00:55
User Badges:

check you access-list 1 it's incorrect in this part

access-list 1 permit

make sure access list allow access host from FastEthernet0/1 network translated because this interface is ip nat inside.


This Discussion