10-04-2007 08:53 AM - edited 03-05-2019 06:53 PM
Hello:
Just wondering if this is even possible. The chassis in question has a WS-X4013 sup in it, 64MB of DRAM and 16MB of flash. Any more detail needed, please let me know. TIA for any guidance.
Brad Olson
10-04-2007 09:09 AM
The quick answer is no you cannot upgrade that to IOS , catos only. You need a Sup IIplus to have IOS and that comes with it from the factory.
10-04-2007 09:16 AM
Hi Brad,
This facility is not available for cat4k switches like you have on Cat6k switches. Cat4k sups will either run CATOS or will run IOS.
So sup 1 and sup 2 will only run and support CATOS and sup 2+,3,4,5 will only run IOS.
HTH
Ankur
*Pls rate all helpfull post
10-04-2007 09:18 AM
Thanks all. The search function wasn't working for me at the time of my post. I found exxactly what you both are saying. Thank you, much appreciated.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide