cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
727
Views
0
Helpful
3
Replies

CWM 15.3.00 don?t running on a station SUN with Solaris 9

TEDDY LLANO
Level 1
Level 1

The CWM 15.3.00 was installed on a station SUN FIRE V240 (CPU 1280MHz, RAM 4GB, 2 Disk 72GB, 8 GB SWAP). The station has the Solaris 9 and the Solaris patches recommended in the release notes for CWM 15.3.00.

When the command CWM (or start_SV+) is issued and the CWM CORE is started, we have the following error message:

terra$ start_SV+

Please wait CWM Processes are starting UP......

ILOG RT-Broker 2.300, licensed to "cisco-san jose, ca"

Error: ilblmap[620756995,1]@terra not registered.

Error: Failed to request logical mapper

Error: ilblmap[620756995,1]@terra not registered.

Error: Failed to request logical mapper

After this, the initialization process stay looped back forever and the CWM Core never works.

There is no other product installed on the station SUN.

Any help would be appreciated.

Thanks,

Teddy

3 Replies 3

David Stanford
Cisco Employee
Cisco Employee

Is DNS working properly? Can you do nslookup's forward and reverse for the hostname/IP?

Also, have a look at /usr/users/svplus/watchdog.conf

does it look like:

# process-name flag working-dir program-path program-arguments

ilblmap on . ilblmap

tftpmgr on . tftpmgr

snmpcomm on . snmpcomm

databroker on . databroker -b 19500

emsd on . emsd -b 19500

emd on . emd -b 19500

rtm on . rtm -b 19500 -l 7200 -s 7000

cmgrd on . cmgrd -b 19500 -c private -i 5

statsparser on statsmgrdir statsparser -f parserconfig.stats

statsager on statsmgrdir statsager -f parserconfig.stats

SNMPAgent on . SNMPAgent ./config/SNMPAgent.conf ./config/NOV

PortProxy on . PortProxy -v ./config/SNMPProxy.conf

ConnProxy on . ConnProxy -I ins ./config/SNMPProxy.conf

RtmProxy on . RtmProxy -v -k 2147483647

statsmain off statsmgrdir statsmain -b 19500 -display

to>:0.0

The DNS was tested and is working fine.

Regarding the file watchdog.conf? the CWM 15.3.00 is quite different: I found the file watchdog in the path /usr/users/svplus/config and has commands with syntax different that you show me (for example, ?debug level 4? as soon on). I found another file named process.conf in the path /usr/users/svplus/config and has commands very similar that you show me.

Thanks

Hi Teddy, 

 

I understand this thread is pretty old, but I'm facing the same issue today with a CWM 16.0 installation on a Solaris 9 and I was wondering if you found a solution to the problem and if you happen to remember it? 

 

Any help would be appreciated. 

 

Thanks, 

Paul 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: