WS-6548-GE-TX card support CATOS for SUP2

Unanswered Question
Oct 5th, 2007
User Badges:

I have cisco sup2 & i need to put gig card 10/100/1000 WS-6548-GE-TX or WS-6148-GE-TX.


Pls suggest CATOS for SUP-2.


Please help it is very urgent.


Regards,


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
glen.grant Fri, 10/05/2007 - 11:03
User Badges:
  • Purple, 4500 points or more

You need to upgrade your catos software to 7.6.1. Your current version does not support it.

moorthy1977 Fri, 10/05/2007 - 11:38
User Badges:

Thanks for your reply kindly suggext the CATOS Software size so that it can store in current mem.


If you can send the document for how to upgrade the CATOS in switch it will be helpful.


Regards,

moorthy.

ankbhasi Fri, 10/05/2007 - 21:35
User Badges:
  • Cisco Employee,

Hi Moorty,


Your sup engine have 32M flash and 128 MB DRAM which will fully support 7.x train CATOS. Your bootstrap version also support 7.x train of CATOS so you are good to go.


You can view this link which will guide you DRAM,Flash and boot rom requirement for 7.x release


http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/ol_1982.htm#wp201331


Also this link will guide you to upgrade your CATOS


http://www.cisco.com/warp/public/473/161.html#maintask1


HTH


Ankur


*Pls rate all helpfull post

Actions

This Discussion