10-05-2007 11:57 AM - edited 03-03-2019 07:03 PM
I have a 2821 router with a vwic 2mft-t1 card. When i use the ip base w/o crypt ios i can set encapsulation ppp on the serial interface. when i use the ip base ios and try to set encapsulation ppp on the serial interface i get the message that hardware does not support the encapsulation?
10-06-2007 12:56 AM
What Major IOS release are you using?
As per feature navigator, PPP is supported on the 2821 with ip base feature set in all major releases of 12.4
Narayan
10-06-2007 07:29 AM
I have tried this with two files:
c2800nm-ipbasek9-mz.124-13.bin
c2800nm-ipbasek9-mz.124-17.bin
Both give me the same error message.
Thank you
Mike
10-06-2007 08:09 AM
very strange. If you can prove this to the TAC and they can reproduce, should be a new bug if not known already.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide