Cat6500 Dram

Unanswered Question
Oct 5th, 2007

Hi,

I have some misunderstanding.

How can i know how much memory my Cat6500 has? (sup720)

Is there 458720K (512mb) ?

Cisco Internetwork Operating System Software

IOS (tm) s72033_rp Software (s72033_rp-PSV-M), Version 12.2(18)SXD7, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2005 by cisco Systems, Inc.

Compiled Tue 13-Dec-05 22:10 by kellythw

Image text-base: 0x4002100C, data-base: 0x42040000

ROM: System Bootstrap, Version 12.2(17r)S4, RELEASE SOFTWARE (fc1)

BOOTLDR: s72033_rp Software (s72033_rp-PSV-M), Version 12.2(18)SXD7, RELEASE SOFTWARE (fc1)

Hostname uptime is 29 weeks, 1 day, 11 hours, 13 minutes

Time since Hostname switched to active is 29 weeks, 1 day, 11 hours, 15 minutes

System returned to ROM by unknown reload cause - suspect boot_data[BOOT_COUNT] 0x0, BOOT_COUNT 0, BOOTDATA 19 (SP by power-on)

System image file is "sup-bootflash:s72033-psv-mz.122-18.SXD7.bin"

cisco WS-C6506-E (R7000) processor (revision 1.1) with 458720K/65536K bytes of memory.

Processor board ID SAL1022Q5A4

SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache

Last reset from s/w reset

X.25 software, Version 3.0.0.

Bridging software.

21 Virtual Ethernet/IEEE 802.3 interface(s)

50 Gigabit Ethernet/IEEE 802.3 interface(s)

1917K bytes of non-volatile configuration memory.

8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).

Configuration register is 0x2102

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Danilo Dy Sat, 10/06/2007 - 00:32

Hi,

458720K/65536K add the two equals 512MB. Some platforms use a fraction of their DRAM as Packet memory. 65536K as Packet memory

Regards,

Dandy

Actions

This Discussion