DIALER TRIGGERS ABNORMALLY!!!!!!!!!

Unanswered Question
Oct 6th, 2007
User Badges:

Hello,


In what circumstances will a dialer triggers even if it is in shutdown mode?


CONFIGURATION BELOW

interface Dialer3

description ISDN Backup NO: site 1

bandwidth 128

ip address 10.1.1.1 255.255.255.252

ip rip authentication mode md5

ip rip authentication key-chain RIP_KEY

encapsulation ppp

shutdown

dialer pool 3

dialer remote-name remoterouter

dialer idle-timeout 300

dialer string 111122222

dialer hold-queue 100

dialer-group 3

fair-queue 64 512 3

no cdp enable

ppp authentication chap

ppp chap hostname BahrainISDN

ppp chap password ourpassword

ppp multilink

ppp multilink links minimum 2

-------------------------------------------------------

sh ip int brief

Dialer1 10.127.254.250 YES TFTP up up

Dialer2 10.127.254.254 YES NVRAM up up

Dialer3 10.127.254.246 YES NVRAM standby mode/disabled down

Dialer5 10.127.254.234 YES NVRAM up up

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Richard Burts Sun, 10/07/2007 - 08:02
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Celso


Are you sure that it is dialer 3 that is activating? With the dialer in shutdown I can not see a way that it would be dialing. If there are 3 other dialers that are up up, is it possible that one of them is activating? I would suggest that you run debug dialer and post the output from it on the next time that the router activates its dialing interface.


HTH


Rick

Actions

This Discussion