DIALER TRIGGERS ABNORMALLY!!!!!!!!!

cfajardo1_2 · ‎10-06-2007

Hello,

In what circumstances will a dialer triggers even if it is in shutdown mode?

CONFIGURATION BELOW

interface Dialer3

description ISDN Backup NO: site 1

bandwidth 128

ip address 10.1.1.1 255.255.255.252

ip rip authentication mode md5

ip rip authentication key-chain RIP_KEY

encapsulation ppp

shutdown

dialer pool 3

dialer remote-name remoterouter

dialer idle-timeout 300

dialer string 111122222

dialer hold-queue 100

dialer-group 3

fair-queue 64 512 3

no cdp enable

ppp authentication chap

ppp chap hostname BahrainISDN

ppp chap password ourpassword

ppp multilink

ppp multilink links minimum 2

-------------------------------------------------------

sh ip int brief

Dialer1 10.127.254.250 YES TFTP up up

Dialer2 10.127.254.254 YES NVRAM up up

Dialer3 10.127.254.246 YES NVRAM standby mode/disabled down

Dialer5 10.127.254.234 YES NVRAM up up

Richard Burts · ‎10-07-2007

Celso

Are you sure that it is dialer 3 that is activating? With the dialer in shutdown I can not see a way that it would be dialing. If there are 3 other dialers that are up up, is it possible that one of them is activating? I would suggest that you run debug dialer and post the output from it on the next time that the router activates its dialing interface.

HTH

Rick

HTH

Rick