distance commands parameter

Answered Question
Oct 7th, 2007

hi every body

i have a question regarding " distance"

command. here is the sample configuration

router ospf 1

network 10.0.0.0

distance 145 10.10.10.1 0.0.0.255 3

!

access-list 3 permit 2.0.0.0

in the above configuration " 10.10.10.1"

is router id supplying the routing information or the ip address of an interface supplying the information?

thanks

I have this problem too.
0 votes
Correct Answer by royalblues about 9 years 3 months ago

For OSPF, the IP address and address mask entered for the distance command should match the source address and address mask of the OSPF router that sent the link-state advertisement (LSA).

The OSPF router would be the router ID

HTH

Narayan

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
royalblues Mon, 10/08/2007 - 00:27

For OSPF, the IP address and address mask entered for the distance command should match the source address and address mask of the OSPF router that sent the link-state advertisement (LSA).

The OSPF router would be the router ID

HTH

Narayan

Actions

This Discussion