password for uc500

Unanswered Question
Oct 8th, 2007
User Badges:

hi folks,

i am not able to log into UC500 box.

the manual says i should get the DHCP when connected to box .but i am not getting

can somebody tell me what is the default password for UC500 box.

or how to set it to default value.

or password recovery.

thx for ur consideration.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
paolo bevilacqua Mon, 10/08/2007 - 01:50
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Connect via serial cable to console port. As the banner indicates, the default is cisco/cisco.

Hope this helps, please rate post if it does!

sandeep pokhriyal Mon, 10/08/2007 - 01:56
User Badges:

thx but its not working.

cisco/cisco is not working somebody might have changed it. i am working in my lab on this box.

any password recovery.

davieshuw Mon, 10/08/2007 - 03:06
User Badges:

As I recall, I think the default username / password for my UC520 was:

username: Cisco

password: Cisco

(Note the C is upper case)


This Discussion