Release Link Transfer - RLT (Tromboning)

clawtonnc · ‎10-08-2007

Wanted to check with this group first to see if someone knows the answer to this question.

We have a situation where we need to have a PRI line use Release Link Trunking (RLT) or tromboning. This is where a call comes into the system and then needs to be transfered out. This is common, but we want to release the line. BELL says they support the feature, but can't seem to find documentation on CallManager, version 5.1 to be specific.

We understand this can be done on a SIP trunk, but need additional information and commands. Any and all help is appreciated.

Dennis Fogler · ‎10-11-2007

It is actually an IOS feature:

http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps5207/products_configuration_guide_book09186a00807517b8.html

Check out page 127 of the PDF.

clawtonnc · ‎10-12-2007

Thanks for the reply, but this is still part of SIP which we understand can work. We've got PRI.

We've continued to research and may have found something. Reading up on the information. Will post upon review.

Regards,