10-08-2007 03:14 PM - edited 03-05-2019 06:57 PM
In my company there is a Cisco 3600 router that has a FastEthernet address of 201.1.110.22/30. My beloved boss gave me the task of changing the CIDR mask from /30 to /29 to create a block of 5 Public IP's. Me, who have no routing experience.
The other part of the task is to:
1 - Assign xxx.x.xx.50 as the Public IP to which all internal IP addresses will be NATed to
2 - Assign xxx.x.xxx.51 as the Public IP for remote management access.
Now, from picking up the CCNA books and notes and watever help i can get i can telnet into the router...get into the interface that has the /30 mask.
It is here that i am stuck and ask for assistance.please.
10-08-2007 05:01 PM
for the mask change just change it from 201.1.110.22 255.255.255.252 to a mask of 255.255.255.248 . This should be done to whatever is attached to the other of that link also .
10-08-2007 05:14 PM
will do. thanks very much....i still have the IP's to assign...one for the NATing and the other for the remote device access....will ask again if i need assistance...thanks again
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide