10-09-2007 08:32 AM
When I try and enable the webvpn access I get this message "webvpn cannot be enabled on an interface that has been configured for HTTPS/ASDM adccess on the same port" From what I found I think I need to change the outside interface under -->configuration --> properties --> device access --> HTTPS/ASDM and change the outside interface from 443 to something else.
Is this correct? or will this brake something?
thanks,
Adam
10-09-2007 08:38 AM
Hi,
If WEBVPN need to be enable in "outside" interface facing internet (which it's should be), then do your device management to "inside" interface by moving the management port HTTPS/ASDM to "inside" interface. If you want both of them in the same interface (i.e. "outside"), I recommend changing the management port for HTTPS/ASDM as it will be more difficult to inform the user that SSL VPN port is not 443
However, I would not recommend putting the management port HTTPS/ASDM to "outside" interface facing internet. I would suggest to put it in "inside" interface and/or the MGMT port.
This can be configured in Configuration + Properties + Device Access + HTTPS/ASDM
Regards,
Dandy
10-09-2007 10:09 AM
Thanks Dandy,
I have checked and my management port is set to the management interface. but when I try and enable the "outside" interface for webvpn I see get the same error message about?
10-09-2007 10:11 AM
Ah,
I think I understand what I'm doing wrong. Dandy, Under -->Configuration --> Properties --> Device Acess I need to change the "outside' interface to "inside"
Correct?
10-09-2007 06:57 PM
Yup.
Thanks for the rating. It helps people with the same problem.
Regards,
Dandy
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide