Duplicate OSPF hello packets

bedevere.curry · ‎10-09-2007

We have an OSPF neighbor and one router is sending duplicate hello/update messages. Also, can someone tell me if their is a show tech interpreter I would greatly appreciate it.

thanks

This is the router sending duplicates:

md01so14bbr01#show version

Cisco Internetwork Operating System Software

IOS (tm) s72033_rp Software (s72033_rp-IPSERVICESK9-M), Version 12.2(18)SXF6, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Compiled Mon 18-Sep-06 23:59 by tinhuang

Image text-base: 0x40101040, data-base: 0x42D90000

ROM: System Bootstrap, Version 12.2(17r)S2, RELEASE SOFTWARE (fc1)

BOOTLDR: s72033_rp Software (s72033_rp-IPSERVICESK9-M), Version 12.2(18)SXF6, RELEASE SOFTWARE (fc1)

md01so14bbr01 uptime is 3 days, 11 hours, 10 minutes

Time since md01so14bbr01 switched to active is 3 days, 11 hours, 9 minutes

System returned to ROM by power cycle (SP by power on)

System restarted at 16:16:03 EST Sat Oct 6 2007

System image file is "sup-bootflash:s72033-ipservicesk9-mz.122-18.SXF6.bin"

md01so14bbr01#show ip ospf interface fastEthernet 1/3

FastEthernet1/3 is up, line protocol is up (connected)

Internet Address 10.161.7.214/30, Area 0.0.0.11

Process ID 100, Router ID 10.161.1.19, Network Type POINT_TO_POINT, Cost: 2000

Transmit Delay is 1 sec, State POINT_TO_POINT

Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5

oob-resync timeout 40

Hello due in 00:00:03

Supports Link-local Signaling (LLS)

Index 12/12, flood queue length 0

Next 0x0(0)/0x0(0)

Last flood scan length is 1, maximum is 51

Last flood scan time is 0 msec, maximum is 4 msec

Neighbor Count is 1, Adjacent neighbor count is 1

Adjacent with neighbor 10.150.65.46

Suppress hello for 0 neighbor(s)

md01so14bbr01#

md01so14bbr01#show ip ospf neighbor 10.150.65.46

Neighbor 10.150.65.46, interface address 10.161.7.213

In the area 0.0.0.11 via interface FastEthernet1/3

Neighbor priority is 0, State is FULL, 6 state changes

DR is 0.0.0.0 BDR is 0.0.0.0

Options is 0x52

LLS Options is 0x1 (LR)

Dead timer due in 00:00:38

Neighbor is up for 04:41:44

Index 8/8, retransmission queue length 0, number of retransmission 0

First 0x0(0)/0x0(0) Next 0x0(0)/0x0(0)

Last retransmission scan length is 0, maximum is 0

Last retransmission scan time is 0 msec, maximum is 0 msec

Danilo Dy · ‎10-09-2007

Hi,

"show tech-support" output interpreter is in this link https://www.cisco.com/pcgi-bin/Support/OutputInterpreter/home.pl you need CCO account.

Regards,

Dandy