Configuring NAT on a WS-C3560G-48TS switch

Arron_Harlow · ‎10-10-2007

In the event of our Cisco PIX failing we are preparing to recover our network. We only have access to our switches, so configuring NAT on the routers is not an option. Instead, we are looking in to the possibility of configuring our WS-C3560G-48TS, with the enhanced IOS, with NAT. Is this possible?

Thanks in advanced.

Jon Marshall · ‎10-10-2007

Hi

Unfortunately not. Only the 6500 switch supports NAT at this current time regardless of what version of IOS you run on the 3560.

Jon

luqmankondeth · ‎10-10-2007

The last time I checked , 3560s donot do nat.

Arron_Harlow · ‎10-10-2007

What if we use the cluster outside-interface command?

paul.matthews · ‎10-10-2007

Still won't do NAT. You will need an external router or firewall to do NAT. No matter what you do to the switch it does not support NAT. See http://www.cisco.com/warp/public/473/166.html#topic1 (I think it was Jon pointed that out to me last week...)

Arron_Harlow · ‎10-10-2007

Thanks a bunch, guys, for your help.