10-10-2007 06:40 AM - edited 03-05-2019 07:00 PM
In the event of our Cisco PIX failing we are preparing to recover our network. We only have access to our switches, so configuring NAT on the routers is not an option. Instead, we are looking in to the possibility of configuring our WS-C3560G-48TS, with the enhanced IOS, with NAT. Is this possible?
Thanks in advanced.
10-10-2007 06:41 AM
Hi
Unfortunately not. Only the 6500 switch supports NAT at this current time regardless of what version of IOS you run on the 3560.
Jon
10-10-2007 06:42 AM
The last time I checked , 3560s donot do nat.
10-10-2007 06:55 AM
What if we use the cluster outside-interface command?
10-10-2007 07:01 AM
Still won't do NAT. You will need an external router or firewall to do NAT. No matter what you do to the switch it does not support NAT. See http://www.cisco.com/warp/public/473/166.html#topic1 (I think it was Jon pointed that out to me last week...)
10-10-2007 07:06 AM
Thanks a bunch, guys, for your help.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: