VPN Concentrator Remote client access

Unanswered Question
Oct 10th, 2007
User Badges:


I currently have set up a VPN Concentrator 3000 series. I use RADIUS to authenticate users and the concentrator acts as a DHCP server and issues IP's to users who connect to our network.

Currently some users can connect and access all required resources without a problem but there are others who manage to connect and authenticate but are unable to access any resources on our internal network.

I have also found that any user that connects via VPN is unable to view our intranet website.

So far I have only put on the basic setup for a VPN concentrator.

Any help would be greatly appreciated.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Danilo Dy Fri, 10/12/2007 - 00:48
User Badges:
  • Blue, 1500 points or more


Check the licensing, you may have reached the maximum allowed.



ttuisawau Sun, 10/14/2007 - 13:45
User Badges:


When users log in there are usually at the most 2 people online via VPN.


kaachary Tue, 12/25/2007 - 15:18
User Badges:
  • Cisco Employee,

Enable IPSec over NAT-T on the concentrator. Enable Trasparent tunneling on vpn clients with "IPSec over UDP NAT/PAT" selected.


This Discussion