snmp-server enable traps bridge

Unanswered Question
Oct 11th, 2007
User Badges:

Hi.

I am trying to enable SNMP traps for STP topology updates.


Is the following trap sufficient?


snmp-server enable traps bridge


I have read other posts indicating to use newroot and topologychange commands but neither of these are available on my switch.


Cisco 4000 L3 Switch. IOS 12.1


Thanks.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
owillins Wed, 10/17/2007 - 08:56
User Badges:
  • Silver, 250 points or more

I think 12.1 version supports only following features for STP SNMP trap

snmp-server enable traps :

To enable SNMP notifications (traps or informs), use the snmp-server enable traps command. To disable all SNMP notifications, use the no form of this command.


snmp-server enable traps [flash [insertion | removal] | fru-ctrl | port-security [trap-rate trap-rate] | removal | stpx | vlancreate | vlandelete | vtp] [mac-notification [change | move | threshold]

no snmp-server enable traps [flash [insertion | removal] | fru-ctrl | port-security [trap-rate trap-rate] | removal | stpx | vlancreate | vlandelete | vtp] [mac-notification]

if you want more features you should upgrade the higher versions.

Actions

This Discussion