2950 Root

Unanswered Question
Oct 11th, 2007
User Badges:

If I have a group of switches within a network, is there a single command which will tell me which switch is the STP root? Or will I need to telnet into each switch and use the show spanning-tree command? Thanks in advance.

Bill

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Jon Marshall Thu, 10/11/2007 - 09:30
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Hi Bill


sh spanning-tree vlan "vlan number" will show the root bridge mac-address and the root port which tells you which switch to go to but you will still need to track this down switch by switch.


Jon

Jon Marshall Fri, 10/12/2007 - 10:05
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Bill


No problem and congratulations on passing exam.


Jon

Actions

This Discussion