10-11-2007 10:41 AM
Board.
I am trying to turn up an OC12 (non-concatenated) that is muxed from a OC48. The OC48 terminates on an ONS 15454 on both sides. From there we run SM fiber to Cisco 12000 series onto an SM OC12/SMT4 Line card on both sides too.
My settings for the ONS are as follows:
Type=STS
Size 12C
Dir = 2way
We see on one Cisco UP/DOWN, and on other Cisco Down/Down
Does any on this forum have any tips at all?
10-11-2007 01:57 PM
You say you want a "non-concatenated" OC-12 but have created a 12c cross connect. Try creating 12 STS-1 cross connects from the OC-48 to the OC-12.
10-18-2007 04:08 AM
I know this sounds silly, but have you checked power levels? It almost sounds like you are overdriving the interfaces....
10-18-2007 05:03 AM
Which OC12 LC do you have on the 12000?
CHOC12/STS3-IR-SC
4OC12E/POS-IR-S
4OC12X/POS-I-SC-B
etc
10-18-2007 05:06 AM
The Line card is the same on both sides:
4 Port Packet Over SONET OC-12c/STM-4 Single Mode
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide