10-11-2007 10:58 AM - edited 03-03-2019 07:08 PM
Is a PIX 520 capable of implementing the use of BGP?
Thanks,
Tom
10-11-2007 11:05 AM
Bad news: it's not ;-(
Leo
10-11-2007 11:50 AM
Leo, Thanks for the info.
-Tom
10-13-2007 07:02 AM
Tom,
The PIX doesn't support BGP. People generally run BGP through the FW rather than to the FW. From a security standpoint, it is a good idea to have the FW participating into the routing.
Here's a document discussing BGP through the FW.
http://www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a008009487d.shtml
Hope this helps,
10-15-2007 03:28 AM
hritter,
Thank you for your info, I will look over this document and if I have any questions I will be sure to submit them here.
Thanks again,
Tom
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide