cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
420
Views
4
Helpful
3
Replies

ASA 5510 ASDM access

nadastraIT
Level 1
Level 1

Hi,

I jus took over this network that has a ASA5510 box. I went through all the diagrams and detials and tried to connect to the Firewall via ASDM loaded in another machine.

When i entered the IP,username and password it waits for sometime and gives a timeout error. I do not know how to connect otherwise.

Please help.

3 Replies 3

thefindjack
Level 1
Level 1

With the 5510 and most other cisco security appliances you need to specify what has access to the appliance via ssh, telnet, http/asdm.

Example

hostname(config)# http 192.168.3.0 255.255.255.0 inside

You are probably getting that error because that machine does not have access to the ASA via ASDM. Here is a document that should help clear some more things up.

http://www.cisco.com/en/US/docs/security/asa/asa71/configuration/guide/mgaccess.html

Please rate if this is helpful. Thanks

Thanks for the info. This was working fine previously according to the previous person who was administering but after CISCO support logged into our appliance and did some configuration it is not working.

I am not very familiar with command line interface. Should i call CISCO support again?

whisperwind
Level 1
Level 1

Console cable.... plug it into the console port

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: