Any Hard Drive for CCM 6.01?

Unanswered Question
Oct 12th, 2007
User Badges:

I'm trying to upgrade from CM 4.1.3 to 6.01 but have the following problem:

My MCS 7825-H-2.2 is supported on CM 6.01 except the HDD is only 40gb. TAC said I can replace with an 80 gb drive but it must be a certain part# or the install will abort. Is this true, or can I use any brand HD?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Rob Huffman Sat, 10/13/2007 - 07:03
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Lee,

I'm going to have to go with Tac on this one. The CCM install does go through a rather severe Hardware check and is likely to fail/abort without the proper HDD. I would go with the recommended MCS Version like;

HDD-7825-H2-80= Spare 80-GB SATA hard disk drive, cold-pluggable

Hope this helps!


paolo bevilacqua Sat, 10/13/2007 - 08:02
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

I believe an equivalent two-letters brand name disk would work as well :)


This Discussion