Buy or Renew
Buy or Renew
Duo Security forums now LIVE! Get answers to all your Duo Security questions. Learn more
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
299
Views
0
Helpful
1
Replies

ASA5505 VPN Remote Access

sweigle
Level 1
Level 1

‎10-12-2007 03:32 PM - edited ‎03-11-2019 04:24 AM

hello,

I'm having problems setting up an ASA5505 VPN Remote Access with Cisco VPN Client 5.01.0600. ASA5505 is 7.2 Software with K9. I get this message in the log: Group = Test, IP = x.x.x.x, Removing peer from peer table failed, no match! I set up a test IKE policy that uses 3des/md5, DH group 5, and preshare. The test group policy uses IPSec as the tunneling protocol. Any hints would be great. thank you

Labels:
0 Helpful
1 Reply 1

amritpatek
Level 6
Level 6

‎10-18-2007 02:10 PM

If you are facing authentication problem check if you have configured the commands "authentication-server-group" and "default-group-policy". Also make sure that Split tunnel and relevant access-lists are configured properly. Following link may help you

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008046f307.shtml

0 Helpful
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents
Review Cisco Networking products for a $25 gift card