Monitor Individual Switches in a Switch Stack

Answered Question
Oct 13th, 2007

Does anyone know how monitor individual switches in a switch stack?

I have this problem too.
0 votes
Correct Answer by jreekers about 9 years 1 month ago

Hi. The best way to go about this is by use of the CiscoStackWiseMIB. I'll show you an example. Go here:

http://jaguar.ir.miami.edu/cgi-bin/snmptransc.cgi

and in the "Object Identifier or Object Name" box, put .1.3.6.1.4.1.9.9.500

Select "tree translation" and you'll see all of the MIB objects this MIB supports.

Other good info:

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_white_paper09186a00801b096a.shtml

(stackwise white paper)

http://www.cisco.com/en/US/products/sw/iosswrel/ps5012/prod_bulletin0900aecd803fdbd8.html

(search for "stackwise")

Or just do a search on CCO for "Stackwise" or "Stackwise MIB" and you'll find many results.

HTH,

-J

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (3 ratings)
Loading.
Correct Answer
jreekers Sun, 10/14/2007 - 18:21

Hi. The best way to go about this is by use of the CiscoStackWiseMIB. I'll show you an example. Go here:

http://jaguar.ir.miami.edu/cgi-bin/snmptransc.cgi

and in the "Object Identifier or Object Name" box, put .1.3.6.1.4.1.9.9.500

Select "tree translation" and you'll see all of the MIB objects this MIB supports.

Other good info:

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_white_paper09186a00801b096a.shtml

(stackwise white paper)

http://www.cisco.com/en/US/products/sw/iosswrel/ps5012/prod_bulletin0900aecd803fdbd8.html

(search for "stackwise")

Or just do a search on CCO for "Stackwise" or "Stackwise MIB" and you'll find many results.

HTH,

-J

yuchenglai Mon, 10/15/2007 - 06:03

J,

This is exactly it!! Thanks! But I think the link at miami.edu is not working.

Actions

This Discussion