×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

FAX using ATA(SCCP) on CME able to send not receive

Unanswered Question
Oct 14th, 2007
User Badges:


Hi all ,


I m using ATA(SCCP) for FAX on CME 4.1 in 2 sites.i m using a ISDN PRI and am able to send fax , but at one site i get fax every third or 4th time other times i get as No fax detected on the FaX machine.at the second site im not getting any fax at all.Please check my configs attached.


the pri lines gives me a error msg on debug isdn q931




Oct 10 10:26:31.141: ISDN Se0/0/0:15 **ERROR**: call_progress: DEV_CONNECTED VOICE ERROR: Bearer capability not available(0x3A): b channel 0 call id 0x45





thanks in advance for your help




Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Anonymous (not verified) Fri, 10/19/2007 - 09:23
User Badges:

The issue could arise if the ports are physically looped back.


check this bug also : CSCse55246

paolo bevilacqua Fri, 10/19/2007 - 10:25
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi,


can you check output of "show e1 controllers". if any slips, you need to configure "network-clock-participate wic X" and "network-clock-select 1 E1 X/0"





Actions

This Discussion