ospf config

Unanswered Question
Oct 15th, 2007
User Badges:

hi team,

we have a ospf ring for our cdma network,which happens to be switched network.we have formed the ring using 4 hsw switch card in cisco1841 router.Now we r experiencing ping delay to one of our site in the ring.as per the ospf config,if one of the site is down ,it takes the alternate path,that's fine.how to enable rstp in the router switch port.

expecting ur reply

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
ariesc_33 Mon, 10/15/2007 - 03:43
User Badges:

The basic verification of layer 2 loop is to verify MAC address forwarding table. Check on what port each devices MAC are being learned.


This Discussion