I have a mgt VLAN going between the Sup in 6500 and the ACE.
svclc module 1 vlan-group 500
svclc vlan-group 500 500-550
description Mgt VLAN
ip address 188.8.131.52 255.255.255.240
class-map type management match-any Mgt_Class
! Management VLAN sources - VLAN 500
2 match protocol telnet source-address 184.108.40.206 255.255.255.240
3 match protocol icmp source-address 220.127.116.11 255.255.255.240
policy-map type management first-match Mgt_Policy
interface vlan 500
desc Mgt VLAN
ip address 18.104.22.168 255.255.255.240
service-policy input Mgt_Policy
I am trying to add my first vip to a context and am setting up the VLAN..
6509-1(config)#int vlan 511
6509-1(config-if)#ip address 22.214.171.124 255.255.255.252
6509-1(config-if)#desc VLAN for VIP-A
Forcing SVI 511 to stay shutdown (SVI 500 tied to line card in slot 1.)
I found this online:
Once the VLANs are assigned to the module, only one interface VLAN (Layer 3 interface) can be configured for one of the VLANs assigned to the module. When an attempt is made to assign a Layer 3 interface to more than one of the VLANs, the above error msg is given.
I want to create VLAN 511 and give it an IP address in the subnet that my VIP is in and then redistribute connected. How can this be done to get routing to the VIP network established.