4.1 CME conferencing and DSP's

Unanswered Question
Oct 15th, 2007
User Badges:

If I have say 2 PVDM2-16's in a 2811, or even say a PVDM2-16 and a PVDM2-8, how do I determine which PVDM is tied to conferencing and which is tied to terminating voice calls on my PRI?


I've read over quite a few of the DSP farm docs relating to hardware comferencing with 4.1 CME, but still am unclear how the actual allocation of the DSP resources is done. If someone has time to clear this up for me that would be great!


Thanks!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
metalium2007 Tue, 10/16/2007 - 00:20
User Badges:
  • Bronze, 100 points or more

Check:


http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddfffc7/0#selected_message


It is a largely discussed theme, sometimes obscure. If you want a good starter information source, try the GWGK course student guide. It has a good starting DSPFarm guide.


Hope it helps,

Met

Actions

This Discussion