I installed the LSM2.6 on Sunfire V245 Server and also installed the update package of Rtr10000 but I couldn't view my router 10008. The error was "http://192.168.2.5:1741/CVng/uii/blank.htm
Message
Can't find applicable device package for 192.168.2.6.
Cause
Device package for this device type is not installed or device support for this device type might not be available or you are attempting to open a component inside a device.
Action
Please install a device package for the device type or open the parent device to manage the component."
Another error is RME couldn't manage the IOS of the router. The error was "SWIM0014: No images to import. If not a CLI based device,
Check DDR if it has the latest information. If not, update inventory and try the Import operation again.
If this is a CLI based device, connect to the device and check whether any valid images are available directly under the supported Flash devices.
See the Software Management feature matrix on Cisco.com to check whether this device uses TELNET or SSH or SNMP"
Pls help me resolve this problem.
Thanks,
Brian