EIGRP problem

Unanswered Question
Oct 16th, 2007

Hi experts,

can any one tell me how can we get EIGRP third AD-5 and wat all configuration is needed plz explain it to me in configuration commands if possible.

thanks in advance

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
saimbt Tue, 10/16/2007 - 03:58

Hi Sandy,

EIGRP will have a third AD-5 whenever there is summarization done by EIGRP.

Pavel Bykov Tue, 10/16/2007 - 04:28

AD 5 is for summarized routes. Here an example:

For topology displayed in the picture, to have summary route with AD 5 appear on R4, type this on R3:

(config)interface eth0

(config-if)ip summary-address eigrp 192.168.0.0 255.255.254.0

Attachment: 
Richard Burts Tue, 10/16/2007 - 06:00

Pavlo

Yes AD of 5 is for EIGRP summarized routes. And it is local to the router that does summarization. Unless I am misunderstanding something, if you summarize on R3 then R3 will have AD of 5 but R4 will have normal AD for those routes.

HTH

Rick

Kevin Dorrell Tue, 10/16/2007 - 07:09

Rick,

By "normal", is that 90 or 170? I presume it would be 90, wouldn't it?

Kevin Dorrell

Luxembourg

sandy3006 Wed, 10/17/2007 - 01:01

hi all,

yes rick ur right AD-5 will be shown on the router where summarization is done not on R4 i have done that thanks rick i have done theory but i was unable to do it practically thanks once again

regards,

sandeep

sandy3006 Wed, 10/17/2007 - 01:04

hi all,

yes rick ur right AD-5 will be shown on the router where summarization is done not on R4 i have done that thanks rick i have done theory but i was unable to do it practically thanks once again

regards,

sandeep

Actions

This Discussion