Pix(6.3(3)) to PIX (7.0 or 7.2(2) conversion

Unanswered Question
Oct 16th, 2007
User Badges:

Dear all,

I have Pix 520(6.3(3)) and i'd like to replace it with another one PIX525 (7.0 or 7.2(2)) But the problem is in the old config ( Conduit ,Fixup,interfaces , VPN and...)

how can i convert (move) the old config (6.3(3)) to the new one (7.2(2) or 7.0) and what about the activation key or the licence?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
nathancielieska Tue, 10/16/2007 - 09:58
User Badges:

conduits are the big thing.


You will need to make an access-list containing all of your conduit statements. This access-list will need to be applied inbound on the outside interface using:


access-group in interface outside


Thats the biggest difference, alot of it will be similar. VPN would be another big difference. Check out the "group-policy" command and the "tunnel-group" commands and examples of each if you have VPN's terminating on the device.

welcomeccie Tue, 10/16/2007 - 10:42
User Badges:

yes there are many conduit commands and vpn too .

I have heard aout the tool conversion did u use it?

Actions

This Discussion