10-16-2007 09:49 AM - edited 03-11-2019 04:26 AM
Dear all,
I have Pix 520(6.3(3)) and i'd like to replace it with another one PIX525 (7.0 or 7.2(2)) But the problem is in the old config ( Conduit ,Fixup,interfaces , VPN and...)
how can i convert (move) the old config (6.3(3)) to the new one (7.2(2) or 7.0) and what about the activation key or the licence?
10-16-2007 09:58 AM
conduits are the big thing.
You will need to make an access-list containing all of your conduit statements. This access-list will need to be applied inbound on the outside interface using:
access-group
Thats the biggest difference, alot of it will be similar. VPN would be another big difference. Check out the "group-policy" command and the "tunnel-group" commands and examples of each if you have VPN's terminating on the device.
10-16-2007 10:42 AM
yes there are many conduit commands and vpn too .
I have heard aout the tool conversion did u use it?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide