cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
470
Views
0
Helpful
2
Replies

Calls fail on PRI from PBX to PRI on MGCP Gateway

gregorysco
Level 1
Level 1

Local 7-digit dialing fails from Mitel PBX to MGCP controlled gateway PRI. Extensions dialing between the two networks as well as long distance dialing all work fine. On the q.931 debug I get a failure that says " cause i = 0x80A9 - Temporary Failure". Any ideas?

2 Replies 2

aamercado
Level 4
Level 4

There are 2 legs.

For the isdn leg, Is the isdn error on a TX or RX?

For the voip leg, what does deb ccapi voip inout tell you?

or deb mgcp packet tell you?

marknigh1
Level 1
Level 1

Did you get this fixed. I am connecting to a Mitel PBX via a Cisco 3845 configured as a H.323 gateway. IP Phones can all Mitel, but when Mitel calls an IP Phone the IP Phone answers but the Mitel phone keeps ringing.

Your help is appreciated.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: