Design Question

Unanswered Question
Oct 16th, 2007
User Badges:

Hi all,


I have a question about designing a network. The plan is to have one HQ site with 4 branches for the start. But in the near future there will be up to 14 branches.


So what will be the best solution on a network basis, to be somehow resilient, cost effecive and some guarantee for bitrate and delay variation?


I thought that Frame-Relay would be a good choice since if I remember right it is based on ATM which has very godd QoS parameters..?


What do you think?


Thanks for your input.


Yves

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Phillip Hichens Wed, 10/17/2007 - 00:46
User Badges:

Hi Yves


This all depends on your country and services providers operating there.

I would recommend getting a L3 MPLS VPN, this scales very well and you can get different offerings (Service Level Agreements) from your SP wrt. availability, QoS and jitter.


Regards

Phillip

bvsnarayana03 Wed, 10/17/2007 - 07:01
User Badges:
  • Silver, 250 points or more

Keeping up with the technology, MPLS can be a good solution.


Depending on the load & upload / download factors, adsl is another option.


FR is also a gud solution depending on availability & is economical as well.


Point-to-point with hub-spoke topology is one more option. But expensive.

ycae Wed, 10/17/2007 - 21:54
User Badges:

Thanks a lot for your Inputs.


Yves

Actions

This Discussion